My Cart  

Autosol Plus 8000 4-color process screen printing emulsion G



Product Description:

Autotype PLUS 8000 is a very high quality, high solids emulsion that is resistant to both water and solvent based inks. Autotype PLUS 8000 will give a slightly higher print quality than Autotype PLUS 7000.


Autotype PLUS 8000 is designed to give the highest quality printing combined with the maximum durability. Autotype PLUS 8000 has a solids content of 38% and is highly resistant to the most aggressive solvent, UV curing and water based inks. It has a wide exposure latitude, is easily decoatable and uses direct addition diazo for maximum consistency of viscosity.


Reliability for long run printing with a wide range of solvent based, water based and co-solvent inks, the highest print quality from an emulsion.

General Information:

See section 'How to use Autotype PLUS emulsions' for detailed advice.


Resistance to a wide range of water, solvent and co-solvent inks makes Autotype PLUS 8000 a suitable direct photostencil for most screen printing applications.

When processed correctly on high tension mesh Autotype PLUS 8000 gives a very hard stencil, which is particularly recommended for applications where the very highest print durability and print quality is required.

Please note that Autotype PLUS 8000 is not suitable for use on low tension, coarse mesh counts when high flexibility is required. For this application please use Autotype PLUS 2000.

More Information
ManufacturerMacDermid Autotype