My Cart  

B-FLEX GIMME5 Heat Transfer Vinyl 20"

The GIMME5 EVO Series is B-FLEX’s flagship product. It’s made up of sixty polyurethane films, of different colors, designed to be transferred on organic or synthetic fibers in only 4 seconds.

Currently only stocked at our Oxnard location.

SKU
FIVE-20
As low as $9.50

YD

GIMME5

Gimme5 presses at 285°F and transfers in just 4 seconds with no cover sheet necessary. This unlocks new possibilities you never thought were possible with HTV before!

Thanks to its thickness of only 80 microns, GIMME5
is pleasant and soft on any garment and easy to use.
This film is made using only the highest quality raw
materials, which ensures a long-lasting application.
We have tested it to last over 100 wash cycles at
90°C/194°F.

GIMME5 provides solutions to common HTV problem

Are you constantly running into the same problems and complications with the heat transfer vinyl you’re currently using? GIMME5 takes out common problems that are faced while completing heat transfer vinyl projects.

Complete your projects with ease without using a cover sheet when pren pressing and completing layers on all B-Flex HTV projects. We’ve designed our products to be pressed at low temperatures and weeded without the tugging and pulling of traditional HTV. With 60 colors this polyurethane film can be applied on organic or synthetic fibers in just four seconds. Its 80 micron thickness and elasticity make for a comfortable wear and can withstand wash cycles up to 90C.

Thanks to the semi-glossy layer of heat-sensitive glue your cutting lines will be highlighted. This along with B-FLEX’s sticky carrier allows for fast weeding and easy repositioning of any small details of your heat flex vinyl that might have accidentally lifted from the carrier.

GIMME5 EVOs are just 80 microns thick (90 microns on the FLUO colors). Combining this with its stretchiness gives it a pleasant feel and makes it easy to apply the HTV vinyl on just about any fabric. This heat transfer vinyl for t-shirts is ideal for multi-layer applications and can withstand washing up to 90 °C.

Application Steps

• Cut - 45° blade
• Weed excess material
• Turn on your heat press - heat to 140°C/285°F
• Place your graphic on the garment
• Press it - 140°C/285°F for 4 seconds
• Remove the liner - hot

More Information
SKUFIVE-20
File UploaderNo
ManufacturerB-Flex
Weight1.0000

Downloads