Heat Transfer Vinyl Remover Solution 32oz

This product works on all heat transfer matrials including glitter.

The Heat Transfer Vinyl Remover Solution By Sign-Rite is used to remove cad cut materials off T-shirts, Jerseys, and any other fabric where a heat transfer has to be removed.

Directions step by step to remove cad cut materials.

1. Turn the garment inside-out and apply the solvent to the underside of the heat applied material. By doing so you will dissolve the adhesive from the heat transfer material.
2. Once you have applied the solvent, it is best to stretch or pull the area of the mistake. This will make the heat applied material start to peel off of the garment.
3. After you have removed the cad cut material We have found it best to then heat press the garment for 3 seconds at 305 degrees.

Available by ground shipping only due to UPS.