IC 1110 CURABLE REDUCER
1110LF Curable Reducer lowers the viscosity of plastisols without affecting the fusing characteristics. 1110LF is also a curable reducer, which means it fuses or cures by itself with the application of heat. The recommended proportion of 1110LF is 1% to 25% by volume. This reducer should not be used in low bleed inks as it can lower the bleed resistance of those inks. For low bleed inks use 1099 Lo-Bleed Reducer
1110LF can help in reducing ink build-up on the back of successive screens when printing wet on wet. The amount of 1110LF needed to reduce build-up will depend on the ink being adjusted. Use 5% to 10%, by volume, 1110LF for opaque inks. Use 1% to 5%, by volume, 1110LF for standard opacity inks. The correct screen mesh, such as 160 to 230 monofilament, properly tensioned, will also help to reduce ink build-up.