My Cart  

IC 7500 Fluorescent

SKU
IC 7500 Series
As low as $39.90

- Create special or standard colors by using International Coatings’ UltraMix®, Pantone® color matching software, either online or on the desktop version.

The UltraMix® 7500 Series System is composed of 19 non-phthalate, high performance colors, perfect for ultra high speed wet-on-wet automatic printing and manual screen printers. The ink is well suited for fine detail with high mesh counts. Ink is recommended for 100% Cotton or 50/50 Cotton/Polyester Blends. Product is to be cured at 325 degrees

Spot Flashing

The 7500 Series inks will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not totally fused. Total fusing of any flashed color may cause inter-coat adhesion problems with the inks printed on top of the flashed ink. Final fusing should occur in the conveyor dryer if possible

Underbase Printing

Use an underbase print when printing 7500 Flourescent inks onto dark fabrics. Use 711, 7014, or 7031 white as an underbase ink. To achieve a softer hand and faster production speeds, print underbase ink through finer mesh counts, 230 to 305 t/in

More Information
SKUIC 7500 Series