Matsui Brite White Discharge
Only %1 left
As low as $15.70
Brite White Matsui Discharge Base
APPLICATION TECHNIQUE** FOR 100% COTTON DISCHARGEABLE
FABRIC WITH REACTIVE DYES
|STENCIL||A water proof direct emulsion or capillary film should be used for optimal performance.|
|SQUEEGEE||60-80 Durometer square edge|
|MIXING||Mix 10% or less pigment with 100% discharge binder making sure to mix pigment into binder before mixing in the Discharge Agent. Discharge Agent should be mixed 10% into 100% discharge binder (by weight). Fixer N can be added to improve wash fastness.|
|DRYING||Matsui Water-Based Discharge System ink must be heat cured for 2.5 - 3 minutes at 300 to 320 degrees F.|
|FINISHING||It is highly recommended to wash and dry garments or fabrics before packaging and shipping.|
|CLEAN UP||Use water and mild soap to wipe screens, screen frames and squeegees and any surfaces in contact with ink.|
** It is the responsibility of the printer to test and determine suitability of all products before a production run.
Application techniques may vary.