My Cart  

Specialty Materials Themoflex Turbo Heat Transfer Vinyl 15''

 ThermoFlex® Turbo is your go-to heat transfer vinyl for quick press time and low temperature settings. This allows usage on a variety of materials including cotton, polyester, cotton/polyester blends, and Nylon! This film boasts a soft hand feel and a rainbow of colors and prints! 


SKU
SMTFT
As low as $10.85

ThermoFlex TURBO

HTV that adheres to a wide variety of fabrics, including nylon
• A quick press and goes on at a low temperature, making it faster to use than other products
• Does not encourage dye migration
• Durable, soft, and easy to cut and weed

ThermoFlex® Turbo is a universal product, adhering to multiple fabrics, including cotton, polyester, cotton/polyester blends, and nylon. That’s right, nylon!

This product is durable, weeds easily, and has a soft hand and strong grip. It discourages dye-migration since it has a low heat and has a quick press time. This also eliminates press marks! It has a pressure-sensitive carrier, which enables easy weeding and re-positioning.

APPLICATION INSTRUCTIONS

IT’S BEST TO TEST!

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
BLADE – 45°
CUT ORIENTATION – Mirror image
TEMP – 270° F
PRESSURE – Medium, even
TIME – 5 seconds
PEEL – Warm. Neons, Col. Blue, & Berry – peel cold.
CARE – Turn inside-out, wash warm, regular cycle, mild detergent. No bleach. Tumble dry normal. Do not iron onto.
LAYERABLE? – Yes with the following exceptions- Columbia Blue, Metallics, Berry, and Neons are top layer only

FOR NYLON

BLADE – 45°
CUT ORIENTATION – Mirror image
TEMP – 300° F
PRESSURE – Medium, even
TIME – Prepress garment for5 seconds, then add material and press 5 seconds
PEEL – Warm, cover with silicone sheet and repress for 10 seconds. Neons,Col. Blue, & Berry – peel cold.
CARE – Turn inside-out, wash warm, regular cycle, mild detergent. No bleach. Tumble dry normal. Do not iron onto.
LAYERABLE? – Yes with the following exceptions- Columbia Blue, Metallics, Berry, and Neons are top layer only

FABRICS

Cotton, Uncoated Polyester, Fabric Blends, Spandex, Lycra, Wool, Linen, and Nylon

THICKNESS

4 mils/100 microns

CUT SETTINGS

PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.

Silhouette

  • Material: Heat Transfer, Smooth
  • Blade: 3
  • Speed: 8
  • Force: 6

Graphtec

  • Speed: 8
  • Force: 14

We use a 45-degree blade

Cricut

  • Material: Vinyl
  • Pressure: Default
  • Blade: Fine-Point Blade

More Information
SKUSMTFT
File UploaderNo
ManufacturerSpecialty Materials

Downloads