7600 Series Direct Print Plastisol

Datasheet

International Coatings' Direct Print 7600 Series is now a part of our expanded line of low-cure screen printing inks. The 7600 Series cures as low as 275°F(135°C) and consists of 29 vibrant ready-for-use colors, including two High Pigment Low-Bleed colors. 

Additives-View Now

IC 7600 High Performance Series is a very creamy ink formulated for high speed printing. Series is well suited for high definition and resolution, fine detail and half-tone prinitng. It can be printed througg finer mesh counts for faster production speeds with less pressure.

RECOMMENDED FABRICS
Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.
INK APPLICATION
Colors should be printed without any modifications. If thinning is required, use 1099LF LB Lo-Bleed Reducer (1% to 3% by weight).
SCREEN MESH AND EMULSION
110 to 305 t/in Monofilament
SQUEEGEE
60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge
CURE TEMPERATURE
325° (163°C) Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
CLEAN-UP
Environmentally friendly McLogan Textile Press Wash.
 

IMPORTANT INFORMATION

1. Use an underbase print when printing 7600 inks onto dark fabrics. Use  7031LF white as an underbase ink.
2. To achieve a softer hand and faster production speeds, print underbase ink through finer mesh counts 230 to 305 t/in
3. The 7600 inks are low bleed inks, not non-bleed inks. On some types of fabric, bleeding or dye migration may occur. Always test print the fabric to be printed before beginning production. Bleeding or dye migration may not occur right away.