Skip to content

How To Clean Your Emulsion Off Your Screen Printing Screen

Screen Shot 2013-05-28 at 7.56.50 PMProperly cleaning your screen is essential not only for your screen printing jobs, but also for the life of your screen.

Here's quick step by step instructions on how to properly clean emulsion off your screen.

  1. Remove the excess ink off of your screen. Feel free to use whatever you have handy for this process...sponge, piece of cardboard, etc.
  2. Use a red Mclogan Scrub Pad, spray your Mclogan Emulsion Remover Concentrate onto the front and back of the screen. Scrub remover-022414both sides.
  3. Rinse with water. A high pressure washer is recommended.
*If you have any stubborn ink stains or traces of emulsion, after relcaiming your screen printing screen use a liquid haze remover. Spray this haze remover onto your screen, let it sit for a few minutes and then take a clean red Mclogan Scrub Pad and scrub until your screen is clean. Pressure washer reccommended Now your screen is ready for your next job. We look forward to hearing from you with any questions.
Previous article Benefits of Screen Printing With International Coatings 7600 Series

Leave a comment

Comments must be approved before appearing

* Required fields